eyerim
>

Hugo - page 4

Rectangular

Rectangular

Squared

Squared

Round

Round

Pilot

Pilot

Flat Top

Flat Top

Oval

Oval

Cat Eye

Cat Eye

Special

Special

Single Lens | Shield

Single Lens | Shield

Hide filter Show filter

Filter

Displaying: 221

Displaying 145 - 192 / 221

1 2 3 4 5

Face shape guide

What is your face type?

Good to know
If you think you have a face type similar to any of the ones listed and at least 2 main characteristics match, you’ve found a match!

Square shape

Square jaw
The face has sharp edges
Forehead, cheekbones and jaw are almost equally wide
Face length is similar to its height

Heart shape

Widow’s peak hairline in the middle of the forehead
Pointier chin
The forehead and cheekbones are the widest
Narrow jaw

Round shape

Face length is similar to its height
The jaw has no distinctive features, it is very rounded
Cheekbones are the widest on the face

Oval shape

The face is longer rather than wider
Cheekbones are more prominent
The forehead and jaw are rounded
No sharp/distinct features

Contact lenses guide

Diopter/Sphere (D/dpt./PWR)

Diopter/Sphere (D/dpt./PWR)

This value determines the power of the contact lens. Generally, spherical power is given in plus (+) values for farsightedness and minus (-) for nearsightedness. ATTENTION - the number of diopters of contact lenses may not match the diopters of your glasses.

Curvature (BC)

Curvature (BC)

The curvature of the contact lens indicates the curvature of the eye in millimeters and thus also how closely the lens adheres to the eye. Usually this dimension is between 8-10 mm. Lower curvature, e.g. 8.40, means that the lens is more curved and will “fit“ more tightly on the eye. A higher curvature value, e.g. 8.70 means that the lens is more flat.

Diameter (DIA)

Diameter (DIA)

This value indicates the diameter (or size) of the lens. Soft contact lenses have a wider diameter than hard contact lenses.

Cylinder (CYL)

Cylinder (CYL)

The cylinder value is important for making contact lenses for astigmatism. It describes the strength of astigmatism and has a minus value increasing in 0.25 increments that compensates for the curvature of the cornea.

Cylinder axis (AX)

Cylinder axis (AX)

The axis is the second important parameter in astigmatism. It indicates the exact position of curvature on the cornea in the range of 0° - 180°.

Addition (ADD)

Addition (ADD)

Addition is the value given if you suffer from presbyopia. It is the difference between the dioptric value for distance and the dioptric value for near. Values up to 1.25 are considered low (also referred to as “low“), up to 2.00 as average (“medium“) and until 3.00 for high (“high“).